目录简介 | Content 0 Introduction 1 Scope 2 Terms and definitions 3 Certificate standards 4 Certificate mode 5 Classification of authentication units 6 Certificate entrusting 6.1 Commission and acceptance of the certification 6.2 Application 6.3 Arrangements 7 Authentication implementation 7.1 Type test 7.2 Initial factory inspection 7.3 Evaluation of certification results and approval of certification 7.4 Time limit of the certification 7.5 Maintenance of vehicles out of production 8 Supervision after inspection 8.1 Follow-up inspection after certificate 8.2 On site samples testing or inspection 8.3 Market sampling test or inspection 8.4 Frequency and time of supervision after certification 8.5 Records on supervision after certification 8.6 Evaluation on supervision after certification 9 Certification 9.1 Validity of the certification 9.2 Contents of the certification 9.3 Modification of the certificate 9.4 Suspension, cancellation and withdrawal of the certificate 9.5 Use of the certification 10 Certification marks 10.1 Mark design allowed to be used 10.2 Requirements for utilization 11 Charges 12 Liability of the certificate 13 Rules for implementation Appendix 1: Product description of motor vehicle exterior lighting and light signal device Appendix 2:Production conformity requirements Appendix 3:Authentication of repair parts for the after-sale maintenance for vehicles out of production Appendix 4:Standard for authentication
|