GB 50092-1996

GB 50092-1996 沥青路面施工及验收规范 （英文版）

Code for construction and acceptance of asphalt pavement

1996-09-27

1997-05-01

111

40.00元

是

1,500.00元

Word/PDF

Contents
1 General Provision
2 Terms, Symbols and Codes
2.1 Terms
2.2 Symbol and Code
3 Base Courses
4 Materials
4.1 General Requirement
4.2 Road Petroleum Asphalt
4.3 Emulsified asphalt
4.4 Liquefied Petroleum Asphalt
4.5 Coal Asphalt
4.6 Coarse Aggregate
4.7 Fine Aggregate
4.8 Padding
5 Asphalt Surface Dressing Pavement
5.1 General Requirement
5.2 Material Specifications and Consumption
5.3 Construction Machinery
5.4 Preparation of Construction
5.5 Construction Method
6 Asphalt Penetration Pavement
6.1 General Requirements
6.2 Material Specifications and Consumption
6.3 Construction Machinery
6.4 Preparation of Construction
6.5 Construction Method
7 Hot－mix Asphalt Mixture Pavement
7.1 General Requirements
7.2 Preparation of Construction
7.3 Mix proportion design of Hot－mix Asphalt Mixture
7.4 Mixing of Hot－mix Asphalt Mixture
7.5 Transportation of Hot－mix Asphalt Mixture
7.6 Spreading of Hot－mix Asphalt Mixture
7.7 Compaction and Molding of Hot－mix Asphalt Mixture
7.8 Seaming
7.9 Opening to Traffic and Others
8 Emulsified Asphalt Crushed stone Mixture Pavement
8.1 General Provisions
8.2 Construction Preparations
8.3 Mix Proportion Design of Emulsified Asphalt Crushed stone Mixture
8.4 Construction of Emulsified Asphalt Crushed stone Mixture Pavement
9 Prime Layer, Blanket Layer and Seal
9.1 Prime Layer
9.2 Blanket layer
9.3 Seal
10 Other Projects
10.1 General Provision
10.2 Pedestrian Road
10.3 Parking Lot for Heavy Vehicle and Bus Station
10.4 Asphalt Paving on the Bridge Deck Made of Cement Concrete
10.5 Curbstone
10.6 Gully and Inspection Shaft
11 Construction Quality Administrations and Inspection/Acceptance
11.1 General Provision
11.2 Material and Equipment Inspection before Construction Carried Out
11.3 Test Pavement Section Paving
11.4 Quality Administration and Inspection in the Construction Process
11.5 Construction Quality Inspection and Acceptance in Handover Acceptance Stage
11.6 Project Construction Conclusion
Appendix A Climate Regions for Construction of Asphalt Pavement
Appendix B Mix Proportion Design Method of Hot－mix Asphalt Mixture
B.1 General Rules
B.2 Material Preparation
B.3 Calculation of Mineral Aggregate Mix Proportion
B.4 Marshall Test
B.5 Water Stability Inspection
B.6 High Temperature Stability Inspection
B.7 Steel Slag Activity Inspection
Appendix C Material Quality Requirement
Appendix D Material Specifications and Consumption for Road
Appendix E Construction Quality Administration and Inspection/acceptance Standards...
Appendix F Compactness Calculation of Asphalt Surface Course and Determination Method for Standard Density
Appendix G Dynamic Management Method for Construction Quality
Appendix H Explanation of Wording in This Code
Additional Information

GB 50092 英文版 English Version