目录简介 | PREFIX = ST1 1.0.1 This standard is prepared to unify professional cartographic conventions of the building structure, ensure the drawing regulation and quality, increase the drawing efficiency, the drawing shall be distinct, concise, meet requirements of design, construction and files, meet engineering construction requirements.
1.0.2 This standard is applicable to engineering drawings made via the following methods:
1 Manual drawing;
2 Computerized drawing
1.0.3 This standard is applicable to the following engineering drawings of the building structures:
1 Design drawings and drawing on completion of newly-built, rebuild and extension projects;
2 Surveyed drawings of former buildings and structures;
3 General design drawing, standard design drawing
1.0.4 Regularity of computerized drawing and layer management of the computerized drawing shall conform to the relevant requirements of current national standard GB/T 50001 “Unified standard for building drawings”.
1.0.5 Building structure drawing shall conform to this standard and comply with relevant current standards of China as well.
2 Basic Requirements
2.0.1 The drawing line width b shall conform to relevant provisions in the current national standard "Unified standard for building drawings" GB/T 50001.
2.0.2 According to the complexity and proportion of the drawing, proper fundamental line width b shall be firstly selected and then corresponding line width shall be selected. According to the levels of the expression, the fundamental line width appropriate b and line width shall be added or reduced appropriately. |
中文版 
English
