咨询热线:400-678-1309 中文版  English


标准翻译 - 查看详情
标准编号  
ASTM B 568-98(2004)
标准名称  
ASTM B 568-98(2004) 用X射线光谱测定法测定镀层厚度的标准试验方法 (中文版)
英文名称  
Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
发布日期  
1900-01-01
实施日期  
1900-01-01
全文页数  
8
原版价格  
18.00元
是否译文  
译文报价  
188.00元
译文格式  
Word/PDF
目录简介  
Significance and Use

This is a sensitive, noncontact, and nondestructive method for measuring the coating thickness (and in some cases, coating composition) of metallic and some nonmetallic coatings over a range of thicknesses from as little as 0.01 μm to as much as 75 μm depending on the coating and substrate materials. It can be used to measure coating and base combinations that are not readily measured by other techniques.

The coating thickness is an important factor in the performance of a coating in service.

1. Scope

1.1 This test method covers the use of X-ray spectrometry to determine thickness of metallic and some nonmetallic coatings.

1.2 The maximum measurable thickness for a given coating is that thickness beyond which the intensity of the characteristic secondary X radiation from the coating or the substrate is no longer sensitive to small changes in thickness.

1.3 This test method measures the mass of coating per unit area, which can also be expressed in units of linear thickness provided that the density of the coating is known.

1.4 Problems of personnel protection against radiation generated in an X-ray tube or emanating from a radioisotope source are not covered by this test method. For information on this important aspect, reference should be made to current documents of the National Committee on Radiation Protection and Measurement, Federal Register, Nuclear Regulatory Commission, National Institute of Standards and Technology (formerly the National Bureau of Standards), and to state and local codes if such exist.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


2. Referenced Documents

ASTM Standards
E135 Terminology Relating to Analytical Chemistry for Metals, ores, and Related Materials
International Standard
ISO3497 Metallic Coatings--Measurement of Coating Thickness--X-ray Spectrometric Methods
关键字  
ASTM B 568 中文版 Chinese Version
  在线下单  
您的电话:
您的邮箱:
  联系我们
Copyright © 2009-2011 北京文心雕语翻译有限公司 保留所有权利。京ICP备09087426号
公司关键字:北京翻译公司 | 北京英语翻译公司 | 北京日语翻译公司 | 北京德语翻译公司