目录简介 | 1. Scope This Standard specifies the code, requirements, test method, test rules, markings, packaging, transportation and storage of steel members of light-weight buildings with gabled frame. This Standard is applicable to steel structure members of light-weight buildings with gabled frame of general industry and civilian structure, while the similar steel members may refer to this. That the provisions unspecified in this Standard shall comply with the current relevant standards of the nation. 2. Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. GB/T 222-1984 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis GB/T 228-1987 Metal Tensile Testing GB/T 229-1994 Metallic Materials-Charpy Notch Impact Test GB/T 700-1988 Carbon Structural Steels GB/T 1228~1231-1991 Specifications of High Strength Bolts with Large Hexagon Head, Large Hexagon Nuts, Plain Washers for Steel Structures GB/T 1591-1994 High Strength Low Alloy Structural Steels GB/T 2975-1998 Steel and Steel Products--Location and Preparation of Test Pieces for Mechanical Testing GB/T 3098.1-2000 Mechanical Properties of Fasteners-Bolts, Screws and Studs GB/T 3 633-1995 Technical Requirements for Sets of Torshear Type High Strength Bolt Hexagon Nut and Plain Washer for Steel Structures GB/T 5117-1995 Carbon Steel Covered Electrode GB/T 5118-1995 Low Alloy Steel Covered Electrodes GB/T 5293-1999 Carbon Steel Electrodes and Fluxs for Submerged Arc Welding GB/T 6725-1992 Technical Requirements of Cold Forming Sectional Steel GB/T 8110-1995 Welding Wires for Gas Shielding Arc Welding of Carbon and Low Alloy Steels GB/T 11345-1989 Method for Manual Ultrasonic Testing and Classification of Testing Results for Ferritic Steel Welds GB/T 12755-1991 Roll-profiled Steel Sheet for Building GB 50205-2002 Code for Acceptance of Construction Quality of Steel Structures JGJ 81-91 Specification for Welding of Steel Structure of Building JGJ 82-91 Design, Construction and Acceptance regulations for High Strength Bolting of Steel Structure JC/T 868-2000 Metal Skinned Rigid Polyurethane Foam Sandwich Panels JC/T 869-2000 Metal Skinned Rock Wool, Slag Wool Sandwich Panels CECS 24-90 Applied Technology Regulations of Fire-resistant Coating for Steel Structure CECS 102:98 Technical Specification for Steel Structure of Light-weight Buildings with Gabled Frames |