目录简介 | 1.1 Scope This Standard applies to on-shore pipeline systems constructed with ferrous materials and that transport gas. Pipeline system means all parts of physical facilities through which gas is transported, including pipe, valves, appurtenances attached to pipe, compressor units, metering stations, regulator stations, delivery stations, holders and fabricated assemblies. The principles and processes embodied in integrity management are applicable to all pipeline systems. This Standard is specifically designed to provide the operator (as defined in section 13) with the information necessary to develop and implement an effective integrity management program utilizing proven industry practices and processes. The processes and approaches within this Standard are applicable to the entire pipeline system. 1.2 Purpose and Objectives Managing the integrity of a gas pipeline system is the primary goal of every pipeline system operator. Operators want to continue providing safe and reliable delivery of natural gas to their customers without adverse effects on employees, the public, customers, or the environment. Incident-free operation has been and continues to be the gas pipeline industry's goal. The use of this Standard as a supplement to the ASME B31.8 Code will allow pipeline operators to move closer to that goal. A comprehensive, systematic, and integrated integrity management program provides the means to improve the safety of pipeline systems. Such an integrity management program provides the information for an operator to effectively allocate resources for appropriate prevention, detection, and mitigation activities that will result in improved safety and a reduction in the number of incidents. This Standard describes a process that an operator of a pipeline system can use to assess and mitigate risks in order to reduce both the likelihood and consequences of incidents. It covers both a prescriptive- and a performance-based integrity management program. The prescriptive process, when followed explicitly, will provide all the inspection, prevention, detection, and mitigation activities necessary to produce a satisfactory integrity management program. This does not preclude conformance with the requirements of ASME B31.8. The performance-based integrity management program alternative utilizes more data and more extensive risk analyses, which enables the operator to achieve a greater degree of flexibility in order to meet or exceed the requirements of this Standard specifically in the areas of inspection intervals, tools used and mitigation techniques employed. An operator can not proceed with the performance-based integrity program until adequate inspections are performed that provide the information on the pipeline condition required by the prescriptive-based program. The level of assurance of a performance-based program or an alternative international Standard must meet or exceed that of a prescriptive program. The requirements for prescriptive- and performance-based integrity management programs are provided in each of the sections in this Standard. In addition, Non-mandatory Appendix A provides specific activities by threat categories, that an operator shall follow in order to produce a satisfactory prescriptive integrity management program. This Standard is intended for use by individuals and teams charged with planning, implementing, and improving a pipeline integrity management program. Typically, a team will include managers, engineers, operating personnel, technicians and/or specialists with specific expertise in prevention, detection, and mitigation activities. |