Preview |
1 Application Scope This standard specifies the limitation of the air pollutants emission concentration of thermal power plant. This standard is applicable to the emission management of the existing thermal power plant and the environmental impact assessment, environmental engineering design and completion environmental protection acceptance of the construction project of thermal power plant and the air pollutants emission management after being put into operation. This standard is applicable to coal-fired power generation boiler with above 65t/h of unit set output except grate furnace and spreader feeder; Various volumes of coal-dust power generation boiler; fuel and gas power generation boiler with above 65t/h unit set output; thermal power plant with various volumes of gas turbine unit; power generation boiler adopted such fuels as gangue, biomass, oil shale, refinery coke when the unit set output is above 65t/h. The gas turbine unit powered cyclically by the integral coal gasification shall be executed the emission limits of gas turbine unit ignited by natural gas in this standard. This standard is not applicable to the thermal power plants fired with domestic wastes and hazardous wastes. This standard is applicable to the pollutant emission behavior allowed by the laws. The site selection of the pollution source set newly and the management of the current pollution source in the special protected zone shall be executed according to the relevant regulations in such laws and regulations and rules as "Law on Prevention of Air Pollution of the People's Republic of China", "Law of the People's Republic of China on Prevention and Control of Water Pollution", "Marine Environment Protection Law of the People's Republic of China", "Law of the People's Republic of China on Prevention of Environmental Pollution Caused by Solid Waste", "Law of Environmental Impact Assessment of the People's Republic of China". 2 Normative References This standard quotes the following documents or provisions therein. For undated references, the latest edition of the normative document is applicable to this standard. |