GB 50147-2010 Code for construction and acceptance of high-voltage electric equipment installation engineering (Text of Document is in English) - Beijing translation compay

1 General Provisions
2 Terms
3 Basic Requirements
4 Hexafluoride Sulfur Circuit Breaker
4.1 General Requirements
4.2 Installation and Adjustment
4.3 Gas Control and Filling
4.4 Acceptance for Transfer Project
5 Gas-insulated Metal-enclosed Switchgear (GIS)
5.1 General Requirement
5.2 Installation and Adjustment
5.3 Installation of Hexafluoride Sulfur Circuit Breaker in GIS
5.4 Installation of Disconnecting Switch and Earthing Switch in GIS
5.5 Gas Control and Filling
5.6 Acceptance for Transfer Project
6 Vacuum Breaker and High-voltage Switch Chassis
6.1 General Requirement
6.2 Installation and Adjustment of Vacuum Breaker
6.3 Installation and Adjustment of High-voltage Switch Chassis (Panel
6.4 Acceptance for Transfer Project
7 Operating Device of Breaker
7.1 General Requirement
7.2 Installation and Adjustment of Operating Device
7.3 Pneumatic Device
7.4 Hydraulic Device
7.5 Spring
7.6 Electromagnetic Device
7.7 Acceptance for Transfer Project
8 Disconnecting Switch, Load Switch and High-voltage Fuse
8.1 General Requirement
8.2 Installation and Adjustment
8.3 Acceptance for Transfer Project
9 Arrester and Discharge Gap of Neutral Point
9.1 General Requirement
9.2 Installation of Arrester
9.3 Installation of Discharge Gap of Neutral Point
9.4 Acceptance for Transfer Project
11 Capacitor
11.1 General Requirement
11.2 Installation of Capacitor
11.3 Installation of Coupling Capacitor
11.4 Installation of Compensation Device of Series Capacitor
11.5 Acceptance for Transfer Project
Explanation of Wording in This Code
List of Quoted Standards